- Output Power: 200 W
- Efficiency: 72%
- Form Factor: Internal
Key Features AC Input 115V – 230V MTBF 100,000 hours on maximum load at +25° C degree Warranty 1 Year Output Power 200 W Form Factor Flex ATX Dimensions WxDxH 3.2″ x 6″ x 1.6″ Detail Specifications – Complied with Flex ATX and ATX12V standard – High efficiency and reliability – Remote On/Off function – Internal 12V DC fan included – Noise Killer (Thermal fan speed control function) – Low noise and ripple – Complies with FCC part 15 subpart J Class B and CISPR 22 Class B – Output over voltage, short circuit, and over current protection – 100% Hi-pot, ATE, and burn-in tested – Re-settable power shut down – Approved by UL 1950, CSA C22.2 Level 3 Input Range – 90~132/180~264V AC, Manual Selection Frequency – 47~63Hz Input Current – 5A (RMS) @115V AC, 3A (RMS) @230V AC Inrush Current – 50A Max for 115V AC, 80A Max for 230V AC Cold start Temperature Range – Operating 0° C ~ +25° C on full load; storage & shipping -20° C ~ +80° C Humidity – 95% on operating and 95% on storage Dielectric Withstand – Input to frame ground 1800V AC for 1 second Efficiency – 72% at minimum measured at nominal AC main voltage and frequency with maximum load on all output Rise Time – Less than 20ms Hold-up Time – 17ms minimum at nominal input voltage Power Good Signal – Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible) Leakage Current – Not exceed 0.75mA at 115V AC, 60Hz MTBF – 100,000 hours on maximum load at +25° C degree Dimension (WxHxL) – 81.5×40.5x150mm/3.2¿x1.6¿x6¿ inches Weight – 3.00lbs Warranty – 1 year
…. Read More ….
Buy with confidence from Amazon